Vibrating Table (Thane)

Vibrating Table

The Vibrating Table is used for compacting concrete cubes and cylinders. Salient FeaturesSpecifications It is designed to carry a load of 140 kg. The apparatus consists of a motor fitted with a variable pitch pulley housed in a cabinet. The vibrations are imparted by means of off-balance masses rotating on a shaft of a vibrator clamped to the underside of the table top. The table top is 50cm x 50cm. and has stops along its edges to prevent moulds from walking off the table during vibration. A cross arm adjustable on a vertical rod at the center of the table is provided to hold the moulds while operating the table. The variable pitch pulley arrangement permits the frequency to be varied between a maximum of 3600 vibrations per minute. A speed regulation handle is provided for increasing or decreasing the frequency. A switch is provided for starting the motor suitable for operation on 440 volts 3 phase 50 cycles A.C.supply.Vibrating Tables of table top size 75cm x 75cm as well as 100cm x 100cm are also available